Low, Affordable, & Competitve Pricing
Aluminium Bi-Folding Doors
The above images are for illustration purposes only & do not reflect on your selected options.
How to measure your Bi-folding
From outside. Measure the width of the aperture in at least 3 different places top middle & bottom. Take the smallest measurement and deduct 10 mm to obtain the width of your door. Measure the Height of the aperture in at least 3 places left, middle & right, take the smallest measurement and deduct 10mm to obtain the height of your door.
£0.00
excl. VAT
Your Selection:
- Frame Option:
- Frame Colour:
- Open In/Out:
- Threshold:
- Cill:
- Handle Colour:
- Hinge Colour:
- Trickle Vent(s):
- Deliver in Kit:
- Side Add Ons:
- Top Add Ons:
- Sash Type:
The standard width of our frame is 50mm sometimes an add on / build up is needed to make the frame thick 20mm / 42mm. If you select trickle vents the bi fold will require a standard 20mm add on for the trickle vent to sit in and the sliding doors will require a 42mm add on for the tickle vents to sit in.
The standard width of our frame is 50mm sometimes an add on / build up is needed to make the frame thick 20mm / 42mm. If you select trickle vents the bi fold will require a standard 20mm add on for the trickle vent to sit in and the sliding doors will require a 42mm add on for the tickle vents to sit in.
Kit form is where the doors come separated from the frame. Usually the doors are delivered built up in the frame and not in kit form. Kit form is useful when these is limited access.
Trickle vents are required in certain situations when building regs are required
Standard thresh is 50mm (weather rated). Low Ali is 15mm (Not weather rated. Please note a cill adds 25mm to these heights
Open into building or outside of building
